产品 - 特诺 - 聚酰亚胺薄膜

TECHNOL - 聚酰亚胺薄膜

| 特诺 | 寺冈 |

产品	性能描述			用途
PA 90	Excellent combination of mechanical, physical, chemical and electrical properties; Withstand a wide range of temperature ranging from -269°C (-452°F ) to 400°C (752°F). Self-extinguishing and non-melting			Flex printed circuits, motor slot liners, magnetic wire insulation, dielectric layers for IC packaging, TABs (Tape Automated Bonding), protection layer in electronics, and backing material for polyimide tape, etc
PD 90	Beside all the properties PA 90 has, PD 90 and PE 90 are extremely good in dimensional stability			FCCL, coverlay, voice coils, flexible circuits
PE 90
PF 90	PA 90 Polyimide film laminated with teflon			Magnet wire insulation, release film

1. PA 90, PD 90, PE 90, PF 90 PI 规格

产品编号		厚度 (mils)		g/m² 比重
PA 90/#50		0.5		18+/- 2
PA 90/#100, PD 90/#100, PE90/#100		1		35 +/- 5
PA 90/#200, PD 90/#200, PE90/#200, PF 90 #200/919		2		71.5+/-5
PA 90/#300, PD 90/#300, PE 90/#300		3		106+/-7
PA 90/#400		4		142+/-10
PA 90/#500		5		179+/- 13
PA 90/#600		0		213+/-15
PA 90/#700		7		250+/-18
PA 90/#800		8		285+/-20
PA 90/#900		9		322+/-22
PA 90/#1000		10		357+/-25

2. Mechanical and Electrical Properties

测试性能		单位	代表数值	测试条件	测试方法
				(%)	(%)	(%)
抗拉性能	MD	Mpa	180	23°C	ASTM D-882
	TD		160
伸长率	MD	%	90	23°C	ASTM D-882
	TD		87
(PA 90, PF 90) Shrinkage		%	0.2	200°C, 2hr	IPC-TM-650 2.2.4A
耐电强度		KV/mm	200	60Hz, 23°C	ASTM D-149
体积电阻率		Ω - cm	1.1 x 10 ¹³	500V, 23°C5	ASTM D-257
耗散因数		-	0.009	1kHz, 23°C	ASTM D-150
介电常数		-	3.5	1kHz, 23°C	ASTM D-150
表面电阻		Ω	1.2 x 10 ¹⁴	500V, 23°C	ASTM D-257


Properties of PD 90, PE 90 Thermal PI Film


测试性能		单位	代表数值 PD 90 PE90	测试条件	测试方法
Shrinkage		%	0.07 0.05	200°C, 2hr	IPC-TM-650 2.2.4A
Coefficient of Thermal Expansion		ppm/°C	12 9	30-100°C	TMA Method
			20 16	100-200°C
			27 19	200-300°C
			25 17	30-300°C

Properties PF 90 PTFE / PI Film

测试性能		单位	代表数值
			PF 90 #120/616B	PF 90 #150/019	PF 90 #200/919
厚度		mil	1.2	1.5	2
抗拉性能		Mpa	150	160	180
伸长率		%	83	87	90
Heat Seal Strength	Film to film	kg/25mm	1.4	1.4	1.6
	Film to copper		1.3	1.4	1.5
Breakdown Voltage		KV/mm	203	212	224



抗拉性能 -Strain Curve (Technol PA 90 Film, 1mil 厚度)			Thermal Degradation (Technol PA 90, PF90 film, 1mil 厚度 heat rate: 10°C/min, in the air atmosphere)


*Polyimide Film Suppliers Cross Reference

Technol ®	Kapton ® Toray DuPont		Kapton ® E I DuPont		Apical ® Allied-Apical
PA 90	HN		HN		AV
PD 90, PE 90	EN		VN		NP
PF 90	-		FN		AF